Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2021SEDONA EXREPAIR AND DIAGNOSISENGINE MECHANICALFUEL SYSTEMFUEL DELIVERY SYSTEMFUEL PUMPREPAIR PROCEDURESINSPECTIONFUEL PUMP
2021 Kia Sedona EX
Fuel pump
2021 Kia Sedona EXSECTION Fuel pump
- Turn the ignition switch OFF, and then remove battery (-) terminal.
- Remove the fuel pump assembly.
(Refer to Fuel Pump - "REMOVAL ")
- Check that motor operates properly when battery voltage is applied to terminals 4 and 5 of fuel pump connector (A).
| Pin No. | Description |
|---|---|
| 1 | Fuel sender signal |
| 2 | - |
| 3 | Fuel sender ground |
| 4 | Fuel pump motor (+) |
| 5 | Fuel pump motor ground |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.