Component Inspection: Notes

2021 Kia K5 LXS, AWDSECTION Notes
Inspection Condition Inspection Procedure Reference
 
  1. Ignition "ON".
 
  1. Connect KDS to "Data Link Connector (DLC)".
  2. Perform "Variant Coding" in "Vehicle S/W management" with KDS.
Fig.1 to 5
G13806620Courtesy of KIA MOTORS AMERICA, INC.
G13806621Courtesy of KIA MOTORS AMERICA, INC.
G13806622Courtesy of KIA MOTORS AMERICA, INC.
G13806623Courtesy of KIA MOTORS AMERICA, INC.
G13806624Courtesy of KIA MOTORS AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.