SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2021K5 LXS, AWDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTDRIVERS ASSISTANCE SYSTEMS - ADASSURROUND VIEW MONITOR (SVM) SYSTEMDESCRIPTION AND OPERATIONMAJOR FEATURESNOTES
2021 Kia K5 LXS, AWD

Major Features: Notes

2021 Kia K5 LXS, AWDSECTION Notes
  1. Display Surrounding Area of Vehicle in Video
    • The surrounding area video display function displays 360 degrees video image captured from four cameras on the Head Unit Screen while the vehicle is moving at low speed or reversing. The SVM System displays total 8 video modes for displaying surrounding video based on the vehicle driving state and the driver's selection.
  2. Guide Line Indication & Steering Wheel Synchronized Feature
    • The Guide Line Indication & Steering Wheel Synchronized Feature is the function that assists the driver in parking by synchronizing the steering wheel with the rear view video display marked with a guide line to help anticipate the direction of the reversing vehicle.
  3. Front/Rear Object Warning (Obstacle Detection Feature)
    • The system receives obstacle warning signal from the PDW sensors mounted on the front/rear of the vehicle and displays the obstacle location on the AVN Head Unit Screen.
  4. Tolerance Compensation (including A/S)
    • Manual Tolerance Compensation Software is embedded in the SVM ECM to compensate the SVM deviation that may occur due to assembly line installation tolerance. You must first setup proper work environment in order to perform correct tolerance compensation.
  5. Rear-view display while driving
    • The function displays the rear view even in N or D upon request of the driver. It provides an optimized image under driving condition unlike parking mode.
MAIN FEATURES - DISPLAY DESCRIPTION

No. Main Features Detailed Description Notes
1 8 Display View Modes
  • Front & 4 Rear Display View Modes
 Merged Video Display of 8 Modes
2 Front Assist Mode Selection Feature
  • Display only the Front Mode by using the Front Mode Selection Switch
 Same as the PDW SVM Switch
3 Rear Steering Synchronized Parking Guide Line Display
  • Displays Parking Guide Line by synchronizing with the steering wheel when going reverse.
 Display over the Rear Video
4 PDW Obstacle Indication
  • Display obstacle warning from rear and front PDW
 Display both on the Cluster and the Head Unit
5 User Setting Option
  • Select Steering Wheel Synchronized Guide Line Indication
  • Select Front/Rear Obstacle Indication
  • Select Initial Front/Rear View Screen
 Provides additional screen settings
6 Assembly Line & A/S Tolerance Compensation Feature
  • Compensation - Tolerance Compensation for camera installation deviation and assembly line tolerance is required
 Compensation function recognition logic applied
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.