Vehicle S/W Management

2021 Kia K5 LXS, AWDSECTION Vehicle S/W Management
Inspection Condition Inspection Procedure Reference
 
  1. Ignition "ON".
 
  1. Connect KDS to "Data Link Connector (DLC)".
  2. Perform "Vehicle S/W Management" of concerned component with KDS.
Fig.1 to 5
G13806912Courtesy of KIA MOTORS AMERICA, INC.
G13806913Courtesy of KIA MOTORS AMERICA, INC.
G13806914Courtesy of KIA MOTORS AMERICA, INC.
G13806915Courtesy of KIA MOTORS AMERICA, INC.
G13806916Courtesy of KIA MOTORS AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.