Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Component Functions
2021 Kia K5 LXS, AWDSECTION Component Functions
- Steering Wheel Sensor: The steering wheel angle is transmitted to the SVM unit through the C-CAN communication line for display of the rear view and steering assisted parking guideline.
- Transmission: The shift lever position is transmitted to the SVM to determine its operation.
- Front/Rear PDW: An alarm screen to display obstacles appears on the omnidirectional monitor that receives data from the parking distance warning (PDW) sensor on the front and rear.
- SVM Unit: It controls the overall operations for video signal processing/input/output, vehicle communication (CAN), and SVM system.
- SVM Switch: The SVM switch signals are input to determine whether or not to provide images in forward display mode.
- Vehicle Speed Sensor: The vehicle speed is transmitted to the SVM to check the SVM operation condition.
- Camera (4 unit): Each unit is mounted on the front, rear, and left/right outside mirrors to capture images from the surroundings and to transmit them to the SVM unit.
- AVN Monitor: It provides the driver with the output image from the SVM unit through the monitor of the AVN (Audio, Video and Navigation system) head unit.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.