Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2020SOUL LX, STANDARD TRANSREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTDRIVERS ASSISTANCE SYSTEMS - ADASFRONT VIEW CAMERA DIAGNOSISDTC INDEX
2020 Kia Soul LX, Standard Trans
DTC Index
2020 Kia Soul LX, Standard TransSECTION DTC Index
DTC INDEX
| DTC | Description |
|---|---|
| DTC C1101 | 17: Battery Voltage High |
| DTC C1102 | 16: Battery Voltage Low |
| DTC C1532 | 11: LKAS Switch Failure |
| DTC C1532 | 15: LKAS Switch Failure |
| DTC C1532 | 23: LKAS Switch Failure |
| DTC C1604 | 49: ECU Hardware Error |
| DTC C1606 | 49: ECU Software Error |
| DTC C160A | 87: Local CAN Bus Off |
| DTC C1611 | 08: CAN Time-out EMS |
| DTC C1611 | 87: CAN Time-out EMS |
| DTC C1612 | 08: CAN Time-out TCU |
| DTC C1613 | 02: CAN Signal Error EMS |
| DTC C1613 | 86: CAN Signal Error EMS |
| DTC C1616 | 87: C-CAN Bus OFF |
| DTC C1623 | 08: CAN Time-out Steering Angle Sensor |
| DTC C1623 | 85: CAN Time-out Steering Angle Sensor |
| DTC C1623 | 87: CAN Time-out Steering Angle Sensor |
| DTC C1625 | 08: CAN Time-Out ABS/ESP |
| DTC C1625 | 85: CAN Time-Out ABS/ESP |
| DTC C1625 | 87: CAN Time-Out ABS/ESP |
| DTC C1628 | 08: CAN Time-out Cluster |
| DTC C1628 | 87: CAN Time-out Cluster |
| DTC C1642 | 02: CAN Message Failure - Brake |
| DTC C1642 | 86: CAN Message Failure - Brake |
| DTC C1646 | 02: CAN Message Failure - TCU |
| DTC C1656 | 02: CAN Signal Error - Cluster |
| DTC C1656 | 86: CAN Signal Error - Cluster |
| DTC C1672 | 02: SAS Message Counter Error |
| DTC C1672 | 86: SAS Message Counter Error |
| DTC C1687 | 85: CAN Time-out VSM2 (MDPS) |
| DTC C1687 | 87: CAN Time-out VSM2 (MDPS) |
| DTC C1688 | 86: VSM2 (MDPS) Signal Error |
| DTC C16B6 | 87: CAN Timeout-AEB |
| DTC C16B8 | 02: AEB Communication Error |
| DTC C1702 | 46: Variant Coding Error |
| DTC C1702 | 62: Variant Coding Error |
| DTC C1812 | 08: CAN Time-out Gateway |
| DTC C1812 | 87: CAN Time-out Gateway |
| DTC C1817 | 02: CAN Signal Error Gateway |
| DTC C1817 | 86: CAN Signal Error Gateway |
| DTC C2239 | 86: MDPS Steering Control Failure for LKAS |
| DTC C2721 | 46: System Calibration Required |
| DTC C2722 | 46: System Out of Calibration |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.