DTC Information: DTC Detecting Condition

2020 Kia Soul LX, Standard TransSECTION DTC Detecting Condition
Item Detecting Condition Possible Cause
DTC Strategy
  • CAN signal monitoring
  • Poor connector connection
  • Open in CAN communication line
  • SCC ECU
Enable Condition
  • Ignition voltage is between 8.5V and 16.5V
  • Engine "ON"
Threshold Value
  • MFC ECU detects more than 10 consecutive CAN bus off events
Detecting Time
  • 0.5s
Recovery Time
  • 0s (at once)
Function Limitation
  • LKA: disabled
  • LDW: disabled
  • HBA: disabled
  • FCA: disabled
  • ISLW: disabled
  • DAW: disabled
  • HDA: disabled
NOTE: LKA: Lane Keeping Assist
LDW: Lane Departure Warning
HBA: High Beam Assist
FCA: Forward Collision-avoidance Assist
ISLW: Intelligent Speed Limit Warning
DAW: Driver Attention Warning
HDA: highway Driving Assist
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.