DTC Index

2020 Kia Soul LX, Standard TransSECTION DTC Index
DTC INDEX

DTC Description
DTC C1101  17: Battery Voltage High
DTC C1102  16: Battery Voltage Low
DTC C1202  81: Wheel Speed Sensor Front-LH Invalid/no Signal
DTC C1205  81: Wheel Speed Sensor Front-RH Invalid/no Signal
DTC C1208  81: Wheel Speed Sensor Rear-LH Invalid/no Signal
DTC C1211  81: Wheel Speed Sensor Rear-RH Invalid/no Signal
DTC C1260  81: Steering Angle Sensor Circuit - Signal
DTC C1260  82: Steering Angle Sensor Circuit - signal
DTC C1260  83: Steering Angle Sensor Circuit - signal
DTC C1283  81: Lateral G Sensor/Longitudinal G Sensor/Yaw Rate Sensor - Signal Error
DTC C1360  81: ESP Irreversible Error
DTC C1604  04: ECU Hardware Error
DTC C160C  87: Local CAN Time-out
DTC C1611  87: CAN Time-out EMS
DTC C1612  87: CAN Time-out TCU
DTC C1613  81: CAN Signal Error EMS
DTC C1613  82: CAN Signal Error EMS
DTC C1613  83: CAN Signal Error EMS
DTC C1616  88: C-CAN Bus OFF
DTC C1620  78: Alignment Failed
DTC C1623  87: CAN Time-out Steering Angle Sensor
DTC C1625  87: CAN Time-Out ABS/ESP
DTC C1628  87: CAN Time-out Cluster
DTC C1629  82: Cluster Invalid Counter
DTC C1632  81: Cluster Control Switch Fail
DTC C1633  81: Cluster Invalid Displayed Speed
DTC C1638  81: ACC/SCC communication error
DTC C1642  81: CAN Message Failure - Brake
DTC C1642  82: CAN Message Failure - Brake
DTC C1642  83: CAN Message Failure - Brake
DTC C1646  81: CAN Message Failure - TCU
DTC C16B8  81: AEB Communication Error
DTC C1702  55: Variant Coding Error
DTC C1741  81: ESC-not available VSM (Check ESC)
DTC C1742  81: Variant Error - ESC (Check ESC)
DTC C1744  55: SCC Coding & AVN/Navi Option Mismatch
DTC C1747  55: Front Radar & Front view Camera Variant Coding Mismatch
DTC C1804  87: CAN time-out LKAS
DTC C1805  81: LKAS CAN Signal Error
DTC C1805  82: LKAS CAN Signal Error
DTC C1805  83: LKAS CAN Signal Error
DTC C1812  87: CAN Time-out Gateway
DTC C1817  82: CAN Signal Error Gateway
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.