Vehicle S/W Management

2020 Kia Soul LX, Standard TransSECTION Vehicle S/W Management
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENTΒ " of concerned component with KDS.
Fig.1 to 10
G13285921Courtesy of KIA MOTORS AMERICA, INC.
G13285923Courtesy of KIA MOTORS AMERICA, INC.
G13285924Courtesy of KIA MOTORS AMERICA, INC.
G13285925Courtesy of KIA MOTORS AMERICA, INC.
G13285926Courtesy of KIA MOTORS AMERICA, INC.
G13285927Courtesy of KIA MOTORS AMERICA, INC.
G13285928Courtesy of KIA MOTORS AMERICA, INC.
G13285929Courtesy of KIA MOTORS AMERICA, INC.
G13285930Courtesy of KIA MOTORS AMERICA, INC.
G13285931Courtesy of KIA MOTORS AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.