Front View Camera System DTCS

2020 Kia Soul LX, Standard TransSECTION Front View Camera System DTCS
Front View Camera System DTC Identification

DTC Description
DTC C1101 17: Battery Voltage High
DTC C1102 16: Battery Voltage Low
DTC C1532 11: LKAS Switch Failure
DTC C1532 15: LKAS Switch Failure
DTC C1532 23: LKAS Switch Failure
DTC C1604 49: ECU Hardware Error
DTC C1606 49: ECU Software Error
DTC C160A 87: Local CAN Bus Off
DTC C1611 08: CAN Time-out EMS
DTC C1611 87: CAN Time-out EMS
DTC C1612 08: CAN Time-out TCU
DTC C1613 02: CAN Signal Error EMS
DTC C1613 86: CAN Signal Error EMS
DTC C1616 87: C-CAN Bus OFF
DTC C1623 08: CAN Time-out Steering Angle Sensor
DTC C1623 85: CAN Time-out Steering Angle Sensor
DTC C1623 87: CAN Time-out Steering Angle Sensor
DTC C1625 08: CAN Time-Out ABS/ESP
DTC C1625 85: CAN Time-Out ABS/ESP
DTC C1625 87: CAN Time-Out ABS/ESP
DTC C1628 08: CAN Time-out Cluster
DTC C1628 87: CAN Time-out Cluster
DTC C1642 02: CAN Message Failure - Brake
DTC C1642 86: CAN Message Failure - Brake
DTC C1646 02: CAN Message Failure - TCU
DTC C1656 02: CAN Signal Error - Cluster
DTC C1656 86: CAN Signal Error - Cluster
DTC C1672 02: SAS Message Counter Error
DTC C1672 86: SAS Message Counter Error
DTC C1687 85: CAN Time-out VSM2 (MDPS)
DTC C1687 87: CAN Time-out VSM2 (MDPS)
DTC C1688 86: VSM2 (MDPS) Signal Error
DTC C16B6 87: CAN Timeout-AEB
DTC C16B8 02: AEB Communication Error
DTC C1702 46: Variant Coding Error
DTC C1702 62: Variant Coding Error
DTC C1812 08: CAN Time-out Gateway
DTC C1812 87: CAN Time-out Gateway
DTC C1817 02: CAN Signal Error Gateway
DTC C1817 86: CAN Signal Error Gateway
DTC C2239 86: MDPS Steering Control Failure for LKAS
DTC C2721 46: System Calibration Required
DTC C2722 46: System Out of Calibration
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.