Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2020SOUL LX, STANDARD TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSDTC INDEXDOUBLE CLUTCH TRANSMISSION SYSTEM DTCS
2020 Kia Soul LX, Standard Trans
Double Clutch Transmission System DTCS
2020 Kia Soul LX, Standard TransSECTION Double Clutch Transmission System DTCS
DOUBLE CLUTCH TRANSMISSION SYSTEM DTC IDENTIFICATION
| DTC | Description |
|---|---|
| P0601-41 | Internal Control Module Memory Check Sum Error |
| P0601-47 | Functional Safety Level 3 S/W Fail |
| P0601-48 | Functional Safety Level 2 S/W Fail |
| P06B0-11 | Odd Sensor Supply Short To Ground |
| P06B3-11 | Even Sensor Supply Short To Ground |
| P0705-29 | Inhibitor Switch Invalid Code |
| P0705-64 | Inhibitor Switch Unused Code |
| P0715-12 | Input Speed Sensor 1 Short To Battery |
| P0715-14 | Input Speed Sensor 1 Short To Ground/Open |
| P0716-03 | Input Speed Sensor 1 Circuit Range/Performance(Invalid Pulse Width) |
| P0716-31 | Input Speed Sensor 1 Circuit Range/Performance(No Pulse) |
| P073E-07 | Gear Dropout Reverse Gear |
| P073E-71 | Unable To Engage(Select) Reverse Gear |
| P073E-73 | Unable To Engage(Shift) Reverse Gear |
| P073E-77 | Unable To Disengage(Shift) Reverse Gear |
| P073F-07 | Gear Dropout Gear 1 |
| P073F-71 | Unable To Engage(Select) Gear 1 |
| P073F-73 | Unable To Engage(Shift) Gear 1 |
| P073F-77 | Unable To Disengage(Shift) Gear 1 |
| P074A-07 | Gear Dropout Gear 2 |
| P074A-71 | Unable To Engage(Select) Gear 2 |
| P074A-73 | Unable To Engage(Shift) Gear 2 |
| P074A-77 | Unable To Disengage(Shift) Gear 2 |
| P074B-07 | Gear Dropout Gear 3 |
| P074B-71 | Unable To Engage(Select) Gear 3 |
| P074B-73 | Unable To Engage(Shift) Gear 3 |
| P074B-77 | Unable To Disengage(Shift) Gear 3 |
| P074C-07 | Gear Dropout Gear 4 |
| P074C-71 | Unable to Engage(Select) Gear 4 |
| P074C-73 | Unable To Engage(Shift) Gear 4 |
| P074C-77 | Unable to Disengage(Shift) Gear 4 |
| P074D-07 | Gear Dropout Gear 5 |
| P074D-71 | Unable To Engage(Select) Gear 5 |
| P074D-73 | Unable To Engage(Shift) Gear 5 |
| P074D-77 | Unable To Disengage(Shift) Gear 5 |
| P074E-07 | Gear Dropout Gear 6 |
| P074E-71 | Unable To Engage(Select) Gear 6 |
| P074E-73 | Unable To Engage(Shift) Gear 6 |
| P074E-77 | Unable To Disengage(Shift) Gear 6 |
| P074F-07 | Gear Dropout Gear 7 |
| P074F-71 | Unable To Engage(Select) Gear 7 |
| P074F-73 | Unable To Engage(Shift) Gear 7 |
| P074F-77 | Unable To Disengage(Shift) Gear 7 |
| P0805-64 | Clutch 1 Motor Hall Sensor Circuit |
| P0820-08 | TGS Lever Complement Value |
| P0820-16 | TGS Lever Under Voltage |
| P0820-17 | TGS Lever Over Voltage |
| P0820-1C | TGS Lever Voltage Out Of Range |
| P087A-64 | Clutch 2 Motor Hall Sensor Circuit |
| P0880-1C | TCM Power Input |
| P0900-01 | Clutch 1 Motor U/V/W Circuit |
| P0901-71 | Clutch 1 System Actuator Stuck |
| P0901-73 | Clutch 1 System Stuck Off |
| P0901-78 | Clutch 1 System Reference Position Failure |
| P0901-7F | Clutch 'A' Actuator Control Circuit Range/Performance |
| P0904-12 | Select 1 Position Sensor Short to Battery |
| P0904-14 | Select 1 Position Sensor Short To Ground/Open |
| P090A-01 | Clutch 2 Motor U/V/W Circuit |
| P090B-71 | Clutch 2 System Actuator Stuck |
| P090B-73 | Clutch 2 System Stuck Off |
| P090B-78 | Clutch 2 System Reference Position Failure |
| P090B-7F | Clutch 'B' Actuator Control Circuit Performance |
| P0910-11 | Select 1 Solenoid Push/Pull Short To Ground |
| P0910-12 | Select 1 Solenoid Push/Pull Short To Battery |
| P0910-13 | Select 1 Solenoid Push/Pull Open |
| P0910-15 | Select 1 Solenoid LSD Short To Battery |
| P0914-64 | Shift 1 Motor Hall Sensor Circuit |
| P0920-01 | Shift 1 Motor U/V/W Circuit |
| P0921-77 | Gear 1 System Referencing Failure |
| P0921-98 | Gear 1 System Motor Thermal Damage |
| P0955-29 | Manual Mode Switch |
| P17C0-00 | DCT None-EOL |
| P1904-12 | Select 2 Position Sensor Short To Battery |
| P1904-14 | Select 2 Position Sensor Short To Ground/Open |
| P1910-11 | Select 2 Solenoid Push/Pull Short To Ground |
| P1910-12 | Select 2 Solenoid Push/Pull Short To Battery |
| P1910-13 | Select 2 Solenoid Push/Pull Open |
| P1910-15 | Select 2 Solenoid LSD Short To Battery |
| P1914-64 | Shift 2 Motor Hall Sensor Circuit |
| P1920-01 | Shift 2 Motor U/V/W Circuit |
| P1921-77 | Gear 2 System Referencing Failure |
| P1921-98 | Gear 2 System Motor Thermal Damage |
| P2765-12 | Input Speed Sensor 2 Short To Battery |
| P2765-14 | Input Speed Sensor 2 Short To Ground/Open |
| P2766-03 | Input Speed Sensor 2 Circuit Range/Performance (Invalid Pulse Width) |
| P2766-31 | Input Speed Sensor 2 Circuit Range/Performance (No Pulse) |
| U0001-88 | CAN Communication Bus Off |
| U0100-87 | Lost Communication With ECM/PCM |
| U0121-87 | Lost Communication With Anti-Lock Brake System (ABS) Control Module |
| U1100-87 | High Speed CAN2 Lost Communication (EMS-DCT) |
| U1103-41 | Check Sum Error With TGS Lever |
| U1103-82 | TGS Lever Alive Counter Error |
| U1103-87 | Lost Communication With TGS Lever |
| U1117-88 | High Speed CAN2 Communication (EMS-DCT) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.