Vehicle S/W Management

2020 Kia Soul LX, Standard TransSECTION Vehicle S/W Management
Inspection Condition Inspection Procedure Reference
  1. Variant Coding.
  2. Ignition "ON".
  1. Connect KDS to "Data Link connector (DLC)".
  2. Perform "Variant Coding" in "Vehicle S/W management" with KDS.
Fig.1 to 6
G13285816Courtesy of KIA MOTORS AMERICA, INC.
G13285817Courtesy of KIA MOTORS AMERICA, INC.
G13285818Courtesy of KIA MOTORS AMERICA, INC.
G13285819Courtesy of KIA MOTORS AMERICA, INC.
G13285820Courtesy of KIA MOTORS AMERICA, INC.
G13285821Courtesy of KIA MOTORS AMERICA, INC.
Inspection Condition Inspection Procedure Reference
  1. Auto Detected Configuration Reset (ESP (ESC) Only).
  2. Ignition "ON".
  1. Connect KDS to "Data Link connector (DLC)".
  2. Perform "Auto Detected Configuration Reset (ESP(ESC) Only)" in "Vehicle S/W management" with KDS.
Fig.1 to 4
G13285822Courtesy of KIA MOTORS AMERICA, INC.
G13285823Courtesy of KIA MOTORS AMERICA, INC.
G13285824Courtesy of KIA MOTORS AMERICA, INC.
G13285825Courtesy of KIA MOTORS AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.