Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Circuit Inspection
2020 Kia Soul LX, Standard TransSECTION Circuit Inspection
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
AV/AVN | 10, 11, 22, 33 (power) - AVN, Audio display 10, 11, 22, 33 (power) - Audio compact | Chassis ground | - | B+ |
|
AV/AVN | 12, 13 (ground) | Chassis ground | - | Approx. below 1Ω |
|
AV/AVN | 7 (M-CAN high) | Chassis ground | - | Fig.1 |
| AV/AVN | 20 (M-CAN low) | Chassis ground | - | ||
|
ICU | 7 (M-CAN high) | Chassis ground | - | ∞ (infinity)Ω |
| ICU | 8 (M-CAN low) | Chassis ground | - | ∞ (infinity)Ω | |
| ICU | 7 (M-CAN high) | AV/AVN | 7 (M-CAN high) | Approx. below 1Ω | |
| ICU | 8 (M-CAN low) | AV/AVN | 20 (M-CAN low) | Approx. below 1Ω | |
| AV/AVN | 7 (M-CAN high) | Chassis ground | - | ∞ (infinity)Ω | |
| AV/AVN | 20 (M-CAN low) | Chassis ground | - | ∞ (infinity)Ω | |
Good
- Go to "Component Inspection " procedure.
No Good
- Repair open or short in circuit and then go to "Verification of Repair " procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.