Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2020SOUL LX, STANDARD TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOLLISION/AVOIDANCEFRONT VIEW CAMERA DIAGNOSIS
2020 Kia Soul LX, Standard Trans
Front View Camera Diagnosis
2020 Kia Soul LX, Standard TransSECTION Front View Camera Diagnosis
- DTC Index
- DTC C1101-17: Battery Voltage High
- DTC C1102-16: Battery Voltage Low
- DTC C1532-11: LKAS Switch Failure
- DTC C1532-15: LKAS Switch Failure
- DTC C1532-23: LKAS Switch Failure
- DTC C1604-49: ECU Hardware Error
- DTC C1606-49: ECU Software Error
- DTC C160A-87: Local CAN Bus Off
- DTC C1611-08: CAN Time-Out EMS
- DTC C1611-87: CAN Time-Out EMS
- DTC C1612-08: CAN Time-Out TCU
- DTC C1613-02: CAN Signal Error EMS
- DTC C1613-86: CAN Signal Error EMS
- DTC C1616-87: C-CAN Bus OFF
- DTC C1623-08: CAN Time-Out Steering Angle Sensor
- DTC C1623-85: CAN Time-Out Steering Angle Sensor
- DTC C1623-87: CAN Time-Out Steering Angle Sensor
- DTC C1625-08: CAN Time-Out ABS/ESP
- DTC C1625-85: CAN Time-Out ABS/ESP
- DTC C1625-87: CAN Time-Out ABS/ESP
- DTC C1628-08: CAN Time-Out Cluster
- DTC C1628-87: CAN Time-Out Cluster
- DTC C1642-02: CAN Message Failure - Brake
- DTC C1642-86: CAN Message Failure - Brake
- DTC C1646-02: CAN Message Failure - TCU
- DTC C1656-02: CAN Signal Error - Cluster
- DTC C1656-86: CAN Signal Error - Cluster
- DTC C1672-02: SAS Message Counter Error
- DTC C1672-86: SAS Message Counter Error
- DTC C1687-85: CAN Time-Out VSM2 (MDPS)
- DTC C1687-87: CAN Time-out VSM2 (MDPS)
- DTC C1688-86: VSM2 (MDPS) Signal Error
- DTC C16B6-87: CAN Timeout-AEB
- DTC C16B8-02: AEB Communication Error
- DTC C1702-46: Variant Coding Error
- DTC C1702-62: Variant Coding Error
- DTC C1812-08: CAN Time-Out Gateway
- DTC C1812-87: CAN Time-Out Gateway
- DTC C1817-02: CAN Signal Error Gateway
- DTC C1817-86: CAN Signal Error Gateway
- DTC C2239-86: MDPS Steering Control Failure For LKAS
- DTC C2721-46: System Calibration Required
- DTC C2722-46: System Out Of Calibration
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.