DTC Information: DTC Detecting Condition

2020 Kia Soul LX, Standard TransSECTION DTC Detecting Condition
Item Detecting Condition Possible Cause
DTC Strategy
  • Check the communication status between ECM/PCM and KDS
  • Check for "LEARNT" ECM/PCM PIN code
  • Check for "LEARNT" ECM/PCM password
Enable Condition
  • Ignition "ON"
  • Normal battery voltage is 9 to 16V
Threshold Value
  • Invalid PIN or password is inputted for more than 3 times
Detecting Time
  • Immediately
Erase Condition
  • Normal PIN or password received
  • DTC erasing with KDS
  • Auto delete after standing for 1 hour at B+ power (Lock timer initialize when power reset)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.