SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2017RIO EX, 4D HATCHBACKREPAIR AND DIAGNOSISTRANSMISSIONTRANSMISSION CONTROL SYSTEMSAUTOMATIC TRANSAXLE CONTROL SYSTEMSHIFT LEVERREPAIR PROCEDURESREMOVALSHIFT LEVER ASSEMBLY REPLACEMENT
2017 Kia Rio EX, 4D Hatchback

Shift Lever Assembly Replacement

2017 Kia Rio EX, 4D HatchbackSECTION Shift Lever Assembly Replacement
  1. Remove the center console.

    (Refer to "INTERIOR (CONSOLE) " )

  2. Disconnect the connector (A)
  3. Remove the control cable (B).
    Fig 1: Disconnecting Connector
    G11845573Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the shift lock cable (A).

    Tightening Torque: 

    9.8-14.7 N.m (1.0-1.5 kgf.m, 7.2-10.8 lb-ft)

    Fig 2: Locating Shift Lock Cable
    G11845574Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the wiring clip (A).
  6. Remove the AT lever (shift lever) assembly (B) by removing the bolts (4ea).

    Tightening Torque: 

    8.8-13.7 N.m (0.9-1.4 kgf.m, 6.5-10.1 lb-ft)

    Fig 3: Removing Wiring Clip
    G11845575Courtesy of KIA MOTORS AMERICA, INC.
  7. Installation is the reverse of removal.
    NOTE: Adjust the shift lock cable.
    (Refer to "Adjusting Procedure For Lock Cam And Shift Lock Cable" )
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.