Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
General Information: General Description
The ECM/PCM monitors variations in the crankshaft rotation speed to determine if any misfires occurred. When a misfire occurs, the rotational speed of the crankshaft slows down. The ECM/PCM then identifies the specific cylinder in which the misfire occurred, and counts individual misfire events. A random misfire (P0300) indicates two or more cylinders are misfiring.Misfires can be caused by a lack of combustion in a cylinder/s due to: the absence of spark, poor fuel metering, poor compression or timing. Even a small number of misfires may result in excessive exhaust emissions, due to the unburned fuel. Increased misfire rates can cause damage to the catalytic converter.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.