Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSKIA2017RIO EX, 4D HATCHBACKREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALFUEL SYSTEMFUEL DELIVERY SYSTEMFILLER-NECK ASSEMBLYREPAIR PROCEDURESREMOVAL

2017 Kia Rio EX, 4D Hatchback

Repair Procedures: Removal

2017 Kia Rio EX, 4D HatchbackSECTION Removal

Open the fuel filler door, and then remove the filler-neck assembly mounting screws (A).

Fig 1: Locating Filler-Neck Assembly Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the fuel filler hose (A) and the vapor hose (B).

Fig 2: Locating Fuel Filler Hose And Vapor Hose
Courtesy of KIA MOTORS AMERICA, INC.
Remove the filler-neck assembly from the vehicle after removing the bracket mounting bolt (A).

Fig 3: Removing Bracket Mounting Bolt

Courtesy of KIA MOTORS AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.