Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Component Location
2015 Kia Soul EV +SECTION Component Location
RELAY BOX (PASSENGER COMPARTMENT) FUSE IDENTIFICATION LEGEND
| Fuse Name | (A) | Circuit Protected | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| POWER OUTLET 2 | 20A | Front Power Outlet | |||||||||||
| ACC | 10A | BCM, Mood Lamp Module, A/V & Navigation Head Unit, Smart Key Control Module, Power Outside Mirror Switch, E/R Junction Block (Power Outlet Relay) | |||||||||||
| POWER OUTLET 1 | 20A | Rear Power Outlet | |||||||||||
| DRL | 10A | BCM | |||||||||||
| MODULE 6 | 7.5A | Front Seat Warmer Module, Driver Air Ventilation Seat Control Module | |||||||||||
| WIPER FRT 1 | 25A | E/R Junction Block (Front Wiper Low Relay) | |||||||||||
| WIPER RR | 15A | Rear Wiper Motor, Malfunction Switch | |||||||||||
| MODULE 5 | 7.5A | BCM, Smart Key Control Module | |||||||||||
| WIPER FRT 2 | 10A | BCM, Multifunction Switch, PCB Block (Front Wiper High Relay) | |||||||||||
| HTD STRG | 15A | Clock Spring (Steering Wheel Heated) | |||||||||||
| A/CON | 7.5A | A/C Control Module, Heater Assembly (Cluster Ionizer) | |||||||||||
| HTD MIRR | 10A | A/C Control Module, Driver/Passenger Power Outside Mirror, Rear Defogger | |||||||||||
| TAIL GATE OPEN | 15A | Tail gate Open Relay | |||||||||||
| S/HEATER FRT | 25A | Front Seat Warmer Module, Driver Air Ventilation Seat Control Module | |||||||||||
| DR LOCK | 20A | Door Lock Relay, Door Unlock Relay, Two Turn Unlock Relay | |||||||||||
| A/BAG IND | 7.5A | Instrument Cluster | |||||||||||
| AIR BAG | 15A | SRS Control Module | |||||||||||
| MODULE 4 | 10A | Electro Chromic Mirror, Front Seat Warmer Module, Driver Air Ventilation Seat Control Module | |||||||||||
| STOP LAMP | 15A | Stop Signal Electronic Module | |||||||||||
| MODULE 7 | 10A | Sport Mode Switch, ICM Relay Box | |||||||||||
| P/WINDOW R/H | 25A | Power Window RH Relay | |||||||||||
| P/WINDOW LH | 25A | Power Window LH Relay, Driver Safety Power Window Module | |||||||||||
| MODULE 1 | 10A | BCM | |||||||||||
| IBAU | 10A | Integrated Brake Actuation Unit | |||||||||||
| MODULE 2 | 10A | Tire Pressure Monitoring Module, Crash Pad switch, Center Fascia Switch, Electronic Parking Brake Module, Stop Lamp Switch, Rear Parking Assist Sensor LH/RH (IN/OUT), Front Parking Assist Sensor LH/RH (OUT/IN) | |||||||||||
| MODULE 3 | 10A | ATM Lever Indicator, Multipurpose Check Connector, PCB Block (IG3 #4 Relay) | |||||||||||
| PCM 3 | 7.5A | Smart Key Control Module | |||||||||||
| IOD 2 | 15A | A/V & Navigation Head Unit | |||||||||||
| IOD 3 | 7.5A | ICM Relay Box, (Outside Mirror Folding Relay, Outside Mirror Unfolding Relay) | |||||||||||
| CLUSTER | 10A | Instrument Cluster | |||||||||||
| IG1 | 15A | EPCU | |||||||||||
| IOD 4 | 7.5A | Instrument Cluster, Tire Pressure Monitoring Module, Data Link Connector, Multipurpose Check Connector, A/C Control Module, BCM | |||||||||||
| MDPS | 7.5A | MDPS Unit | |||||||||||
| START | 7.5A | Transaxle Range Switch | |||||||||||
| IOD 1 | 7.5A | Overhead Console Lamp, Vanity Lamp LH/RH, Room Lamp, Glove Box Lamp, Luggage Lamp | |||||||||||
| PCM 2 | 7.5A | Smart Key Control Module | |||||||||||
| PCM 1 | 20A | Smart Key Control Module | |||||||||||
| BRAKE SWITCH | 10A | Smart Key Control Module, Stop Lamp Switch | |||||||||||
| *USE THE DESIGNATED FUSE AND RELAY ONLY | |||||||||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.