DTC Description: DTC Detecting Condition

2015 Kia Soul EV +SECTION DTC Detecting Condition
Item Detecting Condition Possible Cause
DTC Strategy
  • Brake pedal travel sensor circuit monitoring
  1. Damaged or poor connector connection
  2. Open or short in brake pedal travel sensor circuit
  3. Defected brake pedal travel sensor
Enable Conditions
  • PDT or PDF voltage is out of reference voltage range for 1 sec.

    * Brake pedal travel sensor reference voltage

    PDT: 0.2V ~ 4.8V

    PDF: 0.1V ~ 2.4V

Fail Safe
  • Brake(EBD)

    "PDT & PDF" failure β†’ ESC(ESP), AVH (Yellow)

Remark
  • Clear condition: Ignition switch "OFF" and then "ON"
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.