Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Component Inspection
2015 Kia Soul EV +SECTION Component Inspection
■ Check Internal Errors Of B-CAN Communication Units.
- IG "ON" & Motor "OFF"
- After connect GDS, select "Diagnostic Trouble Codes(DTC)" mode.
- Disconnect B-CAN communication units one by one and monitor DTC to find the cause.
* Body CAN communication Control Units: BCM(Body Control Module), SJB(Smart Junction Box), SMK(Smart Key Module), AVN(Audio Video Navigation)
- Is the DTC erased?
YES
- If no problems were found with the circuits or connectors, replace concerned unit and go to "Verification Of Vehicle Repair " procedure.
NO
- Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "Verification Of Vehicle Repair " procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.