Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015SOUL BASE, STANDARD TRANSREPAIR AND DIAGNOSISTRANSMISSIONTRANSMISSION CONTROL SYSTEMSMANUAL TRANSAXLE CONTROL SYSTEM - 1.6LCONTROL SHAFT COMPLETEREPAIR PROCEDURESREMOVAL
2015 Kia Soul Base, Standard Trans
Repair Procedures: Removal
2015 Kia Soul Base, Standard TransSECTION Removal
- Remove the air cleaner assembly.
(Refer to "AIR CLEANER ")
- Remove the battery and battery tray.
(Refer to "BATTERY ")
- Set shift lever to "N" position.
- Remove the control cable from the control shaft after remove the pin (A) and washer (B).
- Remove the control shaft assembly after loosen the bolts.
Tightening torque:
19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb-ft)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.