Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015SOUL BASE, AUTOMATIC TRANSREPAIR AND DIAGNOSISELECTRICALCHARGING SYSTEMSCHARGING SYSTEM - 1.6LALTERNATORSPECIFICATION
2015 Kia Soul Base, Automatic Trans
Charging System - 1.6L: Alternator: Specification
2015 Kia Soul Base, Automatic TransSECTION Specification
ALTERNATOR SPECIFICATIONS
| Item | Specification | |
|---|---|---|
| Nominal output | 13.5V, 110A | |
| Speed in use | 1, 000 ~ 18, 000 RPM | |
| Voltage regulator | IC Regulator built in type | |
| Regulator Setting Voltage | External mode | Refer to Fig 1 |
| Internal mode | 14.55 ± 0.3V | |
| Temperature Gradient | External mode | 0 ± 3 mV/°C |
| Internal mode | -3.5 ± 2mV/°C | |
| Target voltage data (COM) | Frequency (Hz) | 115 ~ 500 |
| Signal type | PWM | |
| Voltage level (V) | High: 3.5 ± 0.2 | |
| Low: 1.5 ± 0.2 | ||
| Electric load (FR) | Frequency (Hz) | 250 ± 38 |
| Signal type | PWM | |
| Current limitation from vehicle (mA) | 2.7 ~ 7.0 | |
* Regulator Setting Voltage (External mode)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.