Engine Control/Fuel System - General Information - 2.0L: Specifications: Sensors

2015 Kia Soul +SECTION Sensors

Manifold Absolute Pressure Sensor (MAPS)

  • Type: Piezo-resistive pressure sensor type
  • Specification
Pressure
[kPa (kgf/cm2 , psi)]
Output Voltage (V)
20.0 (0.20, 2.9) 0.79
46.7 (0.47, 6.77) 1.84
101.3 (1.03, 14.7) 4.0

Intake Air Temperature Sensor (IATS)

  • Type: Thermistor type
  • Specification
Temperature Resistance (kΩ)
°C °F
-40 -40 40.93 ~ 48.35
-20 -4 13.89 ~ 16.03
0 32 5.38 ~ 6.09
10 50 3.48 ~ 3.90
20 68 2.31 ~ 2.57
40 104 1.08 ~ 1.21
50 122 0.76 ~ 0.85
60 140 0.54 ~ 0.62
80 176 0.29 ~ 0.34

Engine Coolant Temperature Sensor (ECTS)

  • Type: Thermistor type
  • Specification
Temperature Resistance (kΩ)
°C °F
-40 -40 48.14
-20 -4 14.13 ~ 16.83
0 32 5.79
20 68 2.31 ~ 2.59
40 104 1.15
60 140 0.59
80 176 0.32

Throttle Position Sensor (TPS) [integrated into ETC module]

  • Type: Hall IC Non-contact sensor type
  • Specification
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.