Back Up Lamp Bulb

2015 Kia Soul +SECTION Back Up Lamp Bulb
  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear combination lamp assembly.
  3. Remove the back up lamp socket (A) by turning the socket counterclockwise.
    Fig 1: Removing Back Up Lamp Socket
    G09778337Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the back up lamp bulb (A).
    Fig 2: Identifying Back Up Lamp Bulb
    G09778338Courtesy of KIA MOTORS AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.