Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015SEDONA EXREPAIR AND DIAGNOSISRESTRAINTSRESTRAINTS CONTROL SYSTEMSFRONT SEAT BELTHEIGHT ADJUSTREPAIR PROCEDURESREPLACEMENT
2015 Kia Sedona EX
Repair Procedures: Replacement
2015 Kia Sedona EXSECTION Replacement
- Remove the center piller upper trim.
(Refer to Interior Trim - "CENTER PILLER TRIM ")
- After loosening the mounting bolts, remove the height adjust (A).
Tightening torque:
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)
- Install in the reverse order of removal.
Information
Replace any damaged clips.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.