Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSKIA2015RIO SX, 4D HATCHBACKREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESANTI-LOCK BRAKESELECTRONIC STABILITY CONTROL (ESC) SYSTEMTROUBLESHOOTINGWHEN IGNITION KEY IS TURNED ON (ENGINE OFF), THE ABS WARNING LAMP DOES NOT LIGHT UPINSPECTION PROCEDURESCHECK THE CAN CIRCUIT WIRING FOR ABS WARNING LAMP
2015 Kia Rio SX, 4D Hatchback
Check The CAN Circuit Wiring For ABS Warning lamp
2015 Kia Rio SX, 4D HatchbackSECTION Check The CAN Circuit Wiring For ABS Warning lamp
- Disconnect the instrument cluster connector (M01) and ESC HECU connector, and then turn the ignition switch OFF.
- Check for continuity between terminal (M01) 29 of the cluster harness side connector and terminal 26 of ESC HECU harness side.
Check for continuity between terminal (M01) 30 of the cluster harness side connector and terminal 14 of ESC HECU harness side.
Specification:Β Below 1Ξ©
- Is resistance within specification?
YESΒ
- Repair short of wiring between terminal 26, 14 of ESC HECU harness connector and ABS warning lamp module.
NOΒ
- Repair open of wiring between terminal 26, 14 of ESC HECU harness connector and ABS warning lamp module.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.