SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015OPTIMA SX TURBOREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 107 (ENGINE CONTROL SYSTEM DIAGNOSIS (2 OF 3) - 2.4L (EXCEPT HEV))DTC P0625: GENERATOR FIELD/F TERMINAL CIRCUIT LOWDTC INFORMATIONDTC DETECTING CONDITION
2015 Kia Optima SX Turbo

DTC Information: DTC Detecting Condition

2015 Kia Optima SX TurboSECTION DTC Detecting Condition
WARNING: This page is about a different variant/trim than selected.
DTC DETECTING CONDITION

Item Detecting Condition Possible Cause
DTC Strategy
  • Electrical Check
  1. Short to battery in harness
  2. Poor connection or damaged harness
Enable Conditions Case 1
  • Time after ignition ON > 0.1 sec.
  • Engine speed = 0
  • No main relay error
Case 2
  • Engine speed > 0 RPM
  • No relevant failure
  • Battery voltage < 16V
  • 600 < Engine speed (RPM) < 4000
  • Coolant temp. > 73°C (140°F)
Threshold Value Case1
  • Alternator load < 15%
Case2
  • Alternator load < 2%
Diagnostic Time Case1
  • 1 sec.
Case2
  • 20 sec.
MIL On Condition
  • -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.