Repair Procedures: Removal

2015 Kia Optima LimitedSECTION Removal
  1. Disconnect the negative (-) battery terminal.
  2. Remove the seat control switch (A).
    Fig 1: Seat Control Switch
    G07380792Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the seat side cover (A).

    Proceed to: FRONT SEAT OUTER SHIELD COVER

    Fig 2: Seat Side Cover
    G07380793Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the power seat control switch connector (A).
    Fig 3: Power Seat Control Switch Connector
    G07380794Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the power seat control switch (A) after removing the mounting screws (3 EA).
    Fig 4: Power Seat Control Switch & Screws
    G07380795Courtesy of KIA MOTORS AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.