SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015OPTIMA LIMITEDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTHEADLIGHTSAUTO HEADLAMP LEVELING SYSTEM DIAGNOSIS - OPTIMA (EXCEPT HEV)DTC C1258: MAGNET SETTING ERRORGENERAL INFORMATIONDTC DETECTING CONDITION
2015 Kia Optima Limited

General Information: DTC Detecting Condition

2015 Kia Optima LimitedSECTION DTC Detecting Condition
DTC DETECTING CONDITION

Item Detecting Condition Possible Cause
DTC Strategy
  • Check the setting status of Hall IC and Magnet (Switch from the IG OFF status to the IG ON status)
  1. Poor setting of the Hall IC and Magnet
  2. Replacement of the AHLS ECU & height sensor.
Detecting mode
  • Engine "ON" and Head lamp "ON"
Threshold Value
  • It detects when does not complete setting between Hall IC and Magnet
Detecting time
  • Switch from the IG OFF status to the IG ON status
Fail Safe
  • maintain the current status.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.