Interior 1 Antenna

2015 Kia Optima Hybrid EXSECTION Interior 1 Antenna
NOTE:
  • Take care not to scratch the crash pad and related parts
  1. Disconnect the negative(-) battery terminal.
  2. Remove the heater control unit (A) after removing the screws.

    (Refer to the "CRASH PAD ")

    Fig 1: Identifying Heater Control Unit & Mounting Screws
    G00548642Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the interior 1 antenna (A) after disconnecting the connector and loosening the mounting nuts (2 EA).
    Fig 2: Identifying Interior 1 Antenna & Mounting Nuts
    G08309096Courtesy of KIA MOTORS AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.