SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015OPTIMA EXREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTENTERTAINMENT SYSTEMSAUDIO/VIDEO/NAVIGATION (AVN) SYSTEM - OPTIMA (EXCEPT HEV)AUDIO/VIDEO/NAVIGATION (AVN) SYSTEMDESCRIPTION AND OPERATIONLIMITATIONS OF THE NAVIGATION SYSTEMVEHICLE POSITION DISPLAY
2015 Kia Optima EX

Vehicle Position Display

2015 Kia Optima EXSECTION Vehicle Position Display
  1. If multi-pass errors occur due to reflections from buildings or related causes, the current position mark on the navigation may differ from the actual position of the vehicle.
  2. The position of the vehicle on the navigation may be different from the actual position if the vehicle is under the situation. Driving a vehicle for a short period of time will correct the position on the navigation through map matching or GPS information.
    1. When driving on a Y-shaped road with a narrow angle, the current position may be displayed in the opposite direction.
    2. If the vehicle is loaded onto a car transport vehicle, the current position mark may be stalled on the last position prior to loading.
    3. When driving on a spiral-shaped road.
    4. When driving in mountain regions with sharp turns or sudden brakes.
    5. When entering a road after having been in an underground parking structure, building parking structure, or turnable with many rotations.
    6. When the tires have recently been replaced (Especially upon use of spare or studless tires)
    7. If the battery terminal is removed.
    8. When driving in city streets, the current position may be displayed on the opposite side or on an off-road position.
    9. When changing the zoom level from the maximum zoom in level to a different zoom level, the current position mark may be displayed on a different road.
    10. When driving in heavy traffic with frequent go. stops in traffic or intersections.
    11. When driving under slippery conditions, such as heavy sand, snow, etc.
    12. When driving with the tire chain in place.
    13. When using a tire with an incorrect size specification.
    14. When the tire pressure for the 4 tires are different.
    15. When the replacement tire is a worn or used tire (Especially studless tires having passed a 2nd seasons, etc.)
    16. When driving near high-rise buildings
    17. If a roof carrier has been installed
    18. When driving under high speeds or having calculated a long-distance route.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.