SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2015K900 V8REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 138 (SMART KEY SYSTEM)SMART KEY DIAGNOSTICREPAIR PROCEDURESINSPECTIONSMART KEY STATUS CHECK
2015 Kia K900 V8

Smart Key Status Check

2015 Kia K900 V8SECTION Smart Key Status Check
WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
  2. After IG ON, select the "SMK STATUS INFO".
Fig 1: Screen Display - SMK Status Information (1 Of 2)
G11804116Courtesy of KIA MOTORS AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.