Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Repair Procedures: Removal
2015 Kia K900 V8SECTION Removal
- Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
- Disconnect the breather hose.
- Loosen the clamp and then disconnect the air intake hose from the throttle body.
- Remove the resonator, chamber air cleaner and the air intake hose.
- Disconnect the ETC module connector (A) and heater hoses (D).
- Remove the mounting bolts (B), and then remove the ETC module (C) from the engine.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.