Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Repair Procedures: Removal: Installation
2015 Kia K900 V6SECTION Installation
- Install the multifunction switch after connecting the connector.
- Install the clock spring.CAUTION:
- Set the center position by setting the marks between the clock spring and the cover into line.
(Refer to DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING )
- Set the center position by setting the marks between the clock spring and the cover into line.
- Install the steering column upper and lower shrouds.
- Install the steering wheel.NOTE: Make sure the multifunction switch connectors are plugged in properly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.