Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Error detection
2015 Kia K900 V6SECTION Error detection
- Error detection for seats
The PSM detects an error when one of the following conditions occurs during a recall operation, getting in or out operation, or manual switch-based operation.
- Error conditions
- Slide: Fewer than 6 pulses within 2 seconds
- Backrest: Fewer than 8 pulses within 2 seconds
- Front height adjustment: Fewer than 6 pulses within 1 seconds
- Rear height adjustment: Fewer than 6 pulses within 1.5 seconds
- Cushion extension: Fewer than 6 pulses within 1 second
- Headrest: Fewer than 6 pulses within 1 second
- Error recovery conditions
- Slide: 6 pulses or more within 2 seconds
- Backrest: 8 pulses or more within 2 seconds
- Front height adjustment: 6 pulses or more within 1 seconds
- Rear height adjustment: 6 pulses or more within 1.5 seconds
- Cushion extension: 6 pulses or more within 1 second
- Headrest: 6 pulses or more within 1 second
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.