Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Sensing Area
- Measurement condition - PVC pole (diameter 75mm, length 3m), normal temperature
- Distance range detected objects (Measured directly in front of sensor)
- Front sensor
61cm(24in) ~ 10cm(39.4in): ±15cm(5.9in)
31cm(12.2in) ~ 60cm(23.6in): ±15cm(5.9in)
Less than 20cm(7.9in): ± 10cm(3.9in)
- Rear sensor
61cm(24.0in) ~ 120cm(47.2in): ± 15cm(5.9in)
31cm(12.2in) ~ 60cm(23.6in): ± 15cm(5.9in)
Less than 30cm(11.8in): ± 10cm(3.9in)
- Front sensor
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.