Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSKIA2015FORTE EXREPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSSUPPLEMENTAL RESTRAINT SYSTEM CONTROL MODULE (SRSCM), WEIGHT CLASSIFICATION SYSTEM (WCS) & SENSORSSRS CONTROL MODULE (SRSCM)REPAIR PROCEDURESVARIANT CODING PROCEDURE

2015 Kia Forte EX

Variant Coding Procedure

2015 Kia Forte EXSECTION Variant Coding Procedure

On-Line Type On GDS
1. With the ignition "OFF", connect GDS.
2. Ignition "ON" & Engine "OFF" select vehicle name and airbag system.
3. Select Variant coding mode.
4. Follow steps on the screen as instructed.
  1. Initial ACU Variant Coding screen
    
    Fig 1: Display - ACU Variant Coding Screen
    Courtesy of KIA MOTORS AMERICA, INC.
  2. VIN Code entering screen
    
    Fig 2: Display - VIN Code Entering Screen
    Courtesy of KIA MOTORS AMERICA, INC.
  3. Variant coding's proceeding screen-1
    
    Fig 3: Display - Variant Coding's Proceeding Screen-1
    Courtesy of KIA MOTORS AMERICA, INC.
  4. Variant coding's proceeding screen-2
    
    Fig 4: Display - Variant Coding's Proceeding Screen-2
    Courtesy of KIA MOTORS AMERICA, INC.
  5. Variant coding is completed
    
    Fig 5: Display - Variant Coding's Completion Screen
    Courtesy of KIA MOTORS AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.