Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSKIA2014SOUL BASE, STANDARD TRANSREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLELECTRONIC STABILITY CONTROL (ESC) SYSTEM DIAGNOSISDTC C2112: VALVE RELAY ERRORDTC INFORMATIONDTC DETECTING CONDITION

2014 Kia Soul Base, Standard Trans

DTC Information: DTC Detecting Condition

2014 Kia Soul Base, Standard TransSECTION DTC Detecting Condition

Item	Detecting Condition	Possible cause
DTC Strategy	Voltage Monitoring	Defective HECU
Threshold Value	Valve Relay voltage does not reach 80% of ECU voltage upon 60 sec of valve relay "ON" Valve Relay voltage does not reach 80% of ECU voltage upon 60 sec of valve relay "ON" Valve Relay voltage is less than 4 V less than ignition voltage for more than 500 msec upon valve relay "ON"
Warning Indicator Lamp Status	EBD/ABS/ESC (ESP) Warning Indicator Lamp "ON"
Clear Condition	Ignition "OFF" and then "ON"

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.