SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2013FORTE KOUP EX, STANDARD TRANSREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTENTERTAINMENT SYSTEMSAUDIO SYSTEMAUDIO REMOTE CONTROLREPAIR PROCEDURESINSPECTION
2013 Kia Forte Koup EX, Standard Trans

Repair procedures: Inspection

2013 Kia Forte Koup EX, Standard TransSECTION Inspection
  1. Check for resistance between No. 6 and No. 7 terminals in each switch position.
    Fig 1: Audio Remote Control Switch Connector End View
    G07369024Courtesy of KIA MOTORS AMERICA, INC.

    Audio System 

    CONNECTOR TERMINAL RESISTANCE CHART

    Switch Connector terminal Resistance (±5%)
    VOLUME DOWN 6-7 6.81 kΩ
    VOLUME UP 6-7 4.61 kΩ
    MUTE 6-7 3.11 kΩ
    MODE 6-7 2.11 kΩ
    SEEK DOWN 6-7 1.11 kΩ
    SEEK UP 6-7 430 Ω

    Audio system + Auto Cruise 

    CONNECTOR TERMINAL RESISTANCE CHART

    Switch Connector terminal Resistance (±5%)
    VOLUME DOWN 6-7 6.81 kΩ
    VOLUME UP 6-7 4.61 kΩ
    MUTE 6-7 3.11 kΩ
    MODE 6-7 2.11 kΩ
    SEEK DOWN 6-7 1.11 kΩ
    SEEK UP 6-7 430 Ω
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.