Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2010MAGENTIS (CANADA) V6-2.7LREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLDISC BRAKE SYSTEMBRAKE ROTOR/DISCSPECIFICATIONSFRONT
2010 Kia Magentis (CANADA) V6-2.7L
Front
2010 Kia Magentis (CANADA) V6-2.7LSECTION Front
Front brake disc thickness
Standard value 26.0 mm (1.02 in)
Limit 24.4 mm ( 0.96 in)
Thickness variation should not exceed 0.005 mm (0.0002 in) (circumference) and 0.01 mm (0.0004 in) (radius) at any directions.
Brake disc run out
Limit 0.04 mm (0.0016 in) or less
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.