Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2010BORREGO 2WD (CANADA) V8-4.6LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSPISTON
2010 Kia Borrego 2WD (CANADA) V8-4.6L
Piston
2010 Kia Borrego 2WD (CANADA) V8-4.6LSECTION Piston
Piston
Standard diameter 91.945 - 91.975 mm (3.6199 - 3.6211 in)
Piston-to-cylinder clearance 0.045 - 0.065 mm ( 0.0018 - 0.0026 in)
Piston pin outer diameter 21.995 - 22.000 mm (0.8659 - 0.8661 in)
Piston pin hole inner diameter 22.004 - 22.010 mm ( 0.8663 - 0.8665 in)
Connecting rod small end inner diameter 22.007 - 22.018 mm (0.8664 - 0.8668 in)
Piston pin-to-piston clearance 0.004 - 0.015 mm ( 0.0002 - 0.0006 in)
Piston pin-to-connecting rod interference 0.007 - 0.023 mm ( 0.0003 - 0.0009 in)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.