Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2010BORREGO 2WD (CANADA) V8-4.6LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSCRANKSHAFT
2010 Kia Borrego 2WD (CANADA) V8-4.6L
Crankshaft
2010 Kia Borrego 2WD (CANADA) V8-4.6LSECTION Crankshaft
Crankshaft
Standard end play 0.10 - 0.28 mm (0.0039 - 0.0110 in)
Thrust bearing thickness (center bearing) 2.36 - 2.40 mm (0.0929 - 0.0945 in)
Main journal diameter 64.982 - 65.000 mm (2.5583 - 2.5591 in)
Crank pin diameter 51.982 - 52.000 mm (2.0465 - 2.0472 in)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.