Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2010BORREGO 2WD (CANADA) V8-4.6LREPAIR AND DIAGNOSISBODY AND FRAMEROOF AND ASSOCIATED COMPONENTSSUNROOF / MOONROOFSERVICE AND REPAIRREPAIR PROCEDURES
2010 Kia Borrego 2WD (CANADA) V8-4.6L
Repair Procedures
2010 Kia Borrego 2WD (CANADA) V8-4.6LSECTION Repair Procedures
Glass Replacement
NOTE:
- Put on glove to protect your hands.
1. Remove both decoration cover (A).
2. Remove the glass (A) by lifting it up.
NOTE:
- Do not damage the roof panel.
3. Installation is the reverse of removal.
Sunroof Assembly Replacement
1. Remove the following parts :
A. Door scuff trim
B. Front pillar trim
C. Center pillar trim
D. Rear pillar trim
E. Headlining
F. Sunroof glass
2. Disconnect the drain tubes (C).
3. Remove the bracket (A).
4. After loosening the mounding bolts and nuts, remove the sunroof assembly (B).
NOTE:
- Be careful not to scratch the interior trims and other parts.
5. Installation is the reverse of removal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.