Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2009SORENTO 2WD V6-3.8LREPAIR AND DIAGNOSISBODY AND FRAMEMIRRORSSERVICE AND REPAIRREPAIR PROCEDURES
2009 Kia Sorento 2WD V6-3.8L
Repair Procedures
2009 Kia Sorento 2WD V6-3.8LSECTION Repair Procedures
REMOVAL AND INSTALLATION
1. Disconnect negative battery cable.
2. Remove outside rearview mirror garnish.
(1) Remove garnish from door frame.
(2) Disconnect electrical connector.
3. Remove outside rearview mirror.
(1) Remove bolts(3) and clip(1).
Tightening torque : bolt
5-7 Nm (0.5-0.7 kg-m, 4-5 lb-ft)
(2) Disconnect electrical connector.
4. Remove mirror.
CAUTION:
Wear gloves to remove and install the mirror holder
(1) Insert flat bladed screwdriver between the outside rearview mirror holder and the mirror assembly.
5. Remove outside rearview mirror actuator.
CAUTION:
When prying with a flat bladed screwdriver, wrap it with a shop towel to prevent damage.
(1) Remove the outside rearview mirror actuator from the outside rearview mirror housing.
6. Install in reverse order of removal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.