Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2007SPECTRA L4-2.0LREPAIR AND DIAGNOSISWINDOWS AND GLASSHEATED GLASS ELEMENTHEATED GLASS ELEMENT RELAYTESTING AND INSPECTION
2007 Kia Spectra L4-2.0L
Heated Glass Element Relay: Testing and Inspection
2007 Kia Spectra L4-2.0LSECTION Testing and Inspection
INSPECTION
1. Remove the negative (-) battery terminal.
2. Remove the rear window defogger relay after removing to the driver's crash pad lower panel from passenger compartment.
3. There should be continuity between the No.30 and No.87 terminals when power and ground are connected to the No.85 and No.86 terminals.
4. There should be no continuity between the No.30 and No.87 terminals when power is disconnected.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.