Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2001SPORTAGE LIMITED, RWD, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSFLUIDS
2001 Kia Sportage Limited, RWD, Standard
Quick Lookups: Fluids
2001 Kia Sportage Limited, RWD, StandardSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | N/A | N/A | PAG 46 | See Underhood Decal. | S | ||
| Air Cond Refrigerant | 1.56 LBS. | 0.7 KG | R-134a | S | |||
| Automatic Transmission Fluid | 7.20 QTS. | 6.81 L | Automatic Transmission Fluid DEXRON IIE or M III | S | |||
| Brake Fluid | N/A | N/A | DOT 3 or DOT 4 Brake Fluid | S | |||
| Differential Gear Oil | Front | 1.30 QTS. | 1.23 L | API - GL-5, SAE-90W | S | ||
| Differential Gear Oil | Rear | 1.60 QTS. | 1.51 L | API - GL-5, SAE-90W | S | ||
| Engine Coolant | 8.00 QTS. | 7.57 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | S | |||
| Engine Oil | 4.40 QTS. | 4.16 L | API - SAE 10W-30 | S | |||
| Fuel Tank | 4 Door | 15.80 GALS. | 59.8 L | S | |||
| Manual Transmission Fluid | 1.30 QTS. | 1.23 L | API - GL 4 or GL 5, SAE 75W-90 | S | |||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid DEXRON IIE or M III | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.