Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2001SEPHIA LS L4-1.8LREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLSPECIFICATIONS
2001 Kia Sephia LS L4-1.8L
Brakes and Traction Control: Specifications
2001 Kia Sephia LS L4-1.8LSECTION Specifications
Front Brake Rotor/Disc
Thickness:
Standard 0.79 inch (20 mm)
Minimum 0.71 inch (18 mm)
Runout:
Maximum 0.004 inch (0.08 mm)
Rear Brake Rotor/Disc
Thickness:
Standard 0.4 inch (10 mm)
Minimum 0.32 inch (8 mm)
Runout:
Maximum 0.0039 inch (0.08 mm)
Brake Drum
Inside Diameter:
Maximum 7.87 inch (200 mm)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.