SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2000SPECTRA GSX L4-1.8LREPAIR AND DIAGNOSISINSTRUMENT PANEL, GAUGES AND WARNING INDICATORSINSTRUMENT CLUSTER / CARRIERSERVICE AND REPAIRINSTRUMENT CLUSTER ASSEMBLY BEZEL/LENS
2000 Kia Spectra GSX L4-1.8L

Instrument Cluster Assembly Bezel/Lens

2000 Kia Spectra GSX L4-1.8LSECTION Instrument Cluster Assembly Bezel/Lens

Instrument Cluster:






REMOVAL

NOTE:
a. Do not touch face of a gauge or back of lens with fingers. It will leave a permanent fingerprint
b. Use care in removing instruments from instrument cluster case. Make sure instruments are face-up when separating bezel/lens from cluster case.




1. With instrument cluster bezel/lens downward on a soft, clean shop cloth, press on each of bezel tabs going out around unit while using pressure between bezel/lens and cluster.
Do not remove bezel/lens. Make sure each tab is not in a locked position in its mating slot.




2. Place instrument cluster case on its back, bezel/lens facing up, and carefully pull bezel/lens away from cluster case.

INSTALLATION

Install in reverse order of removal.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.