Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSKIA2000SEPHIA LS SEDAN L4-1.8LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSSTEERING COLUMN
2000 Kia Sephia LS Sedan L4-1.8L
Steering Column
2000 Kia Sephia LS Sedan L4-1.8LSECTION Steering Column
GENERAL INFORMATION
Tilt Stroke 1.57 inch (40 mm)
TIGHTENING SPECIFICATIONS
Upper Column Bracket:
Nut 12-17 ft. lbs. (16-23 Nm)
Bolt 12-17 ft. lbs. (16-23 Nm)
Universal Joint Pinch Bolt 13-20 ft. lbs. (18-26 Nm)
Tilt Stroke 1.57 inch (40 mm)
TIGHTENING SPECIFICATIONS
Upper Column Bracket:
Nut 12-17 ft. lbs. (16-23 Nm)
Bolt 12-17 ft. lbs. (16-23 Nm)
Universal Joint Pinch Bolt 13-20 ft. lbs. (18-26 Nm)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.